Assessment of microbial bioburden on portable medical equipment in a hospital setting.

Objectives: Although routine disinfection of portable medical equipment is required in most hospitals, frontline staff may not be able to disinfect portable medical equipment at a rate that adequately maintains low bioburden on high-use equipment. This study quantified bioburden over an extended time period for two types of portable medical equipment, workstations on wheels and vitals machines, across three hospital wards. Methods: Bioburden was quantified via press plate samples taken from high touch surfaces on 10 workstations on wheels and 5 vitals machines on each of 3 medical surgical units. The samples were taken at three timepoints each day over a 4-week period, with random rotation of timepoints and portable medical equipment, such that frontline staff were not aware at which timepoint their portable medical equipment would be sampled. The mean bioburden from the different locations and portable medical equipment was estimated and compared with Bayesian multilevel negative binomial regression models. Results: Model estimated mean colony counts (95% credible interval) were 14.4 (7.7-26.7) for vitals machines and 29.2 (16.1-51.1) for workstations on wheels. For the workstations on wheel, colony counts were lower on the mouse, 0.22 (0.16-0.29), tray, 0.29 (0.22, 0.38), and keyboard, 0.43 (0.32-0.55), when compared to the arm, as assessed by incident rate ratios. Conclusions: Although routine disinfection is required, bioburden is still present across portable medical equipment on a variety of surfaces. The difference in bioburden levels among surfaces likely reflects differences in touch patterns for the different portable medical equipment and surfaces on the portable medical equipment. Although the association of portable medical equipment bioburden to healthcare-associated infection transmission was not assessed, this study provides evidence for the potential of portable medical equipment as a vector for healthcare-associated infection transmission despite hospital disinfection requirements.

Effect of a "feedback prompt" from a disinfection tracking system on portable medical equipment disinfection.

BACKGROUND: Portable medical equipment (PME) may contribute to transmission of multidrug-resistant organisms without proper disinfection. We studied whether a Disinfection Tracking System (DTS) with feedback prompt, attached to PME, can increase the frequency of PME disinfection. METHODS: DTS devices were placed on 10 workstations-on-wheels (WOWs) and 5 vitals machine (VM). After a 25 day "screen-off" period, the DTS device screens were turned on to display the number of hours since the last recorded disinfection event for a 42 day period. We used a Bayesian multilevel zero-inflated negative binomial model to compare the number of events in the display "screen-off" to the "screen-on" period. RESULTS: During the "screen-off" period, there were 1.26 and 0.49 mean disinfection events and during the "screen-on" period, there were 1.76 and 0.50 mean disinfection events for WOWs and VM, respectively, per day. The model estimated mean events per device per day in the the "screen-on" period for WOW's were 1.32 (1.10 - 1.57) times greater than those in the "screen-off" period and the "screen-on" period for VM devices was 1.37 (0.89 - 2.01) times greater than those in the "screen-off" period. CONCLUSIONS: The rate of disinfection events for WOWs increased following the implementation of the DTS feedback prompt.

Degree of concordance of Clostridioides difficile strains in adults with community-associated C. difficile infection and infants with C. difficile colonization.

BACKGROUND: Infants asymptomatically excrete Clostridioides difficile during their first year of life, suggesting that they may represent a source of infection for adults who acquire community-associated C. difficile infection (CA-CDI). The genetic relationship of C. difficile strains from asymptomatic infants and adults with CA-CDI is not well defined. METHODS: In this study, 50 infants were recruited at birth, and stool samples were collected at routine well-child visits. Adult stool samples collected during the same period and geographical area from patients who were diagnosed with CA-CDI were selected for comparison. C. difficile was cultivated and probed by PCR for toxin genes and were typed by PCR fluorescent ribotyping. Isolates from adults and infants with shared ribotypes were subjected to whole-genome sequencing (WGS). RESULTS: Of these 50 infants, 36 were positive for C. difficile at least once in their first year of life, with a peak incidence at 6 months. Among 180 infant stool samples, 48 were positive. Of 48 isolates from positive stools, 29 were toxigenic by polymerase chain reaction (PCR) and 8 of 48 stool samples were positive for toxin by enzyme immunoassays (EIAs). Ribotypes F106 and F014-020 were present in both colonized infants and adults with CA-CDI. WGS identified 1 adult-infant pair that differed by 5 single-nucleotide polymorphisms (SNPs). Also, 4 additional adult-infant clusters differed by ≤16 SNPs. CONCLUSIONS: Infants that are colonized with C. difficile share ribotypes with adults from the same geographical region with CA-CDI. Selected isolates in the 2 populations show a genetic relationship by WGS.

Clade-specific variation in susceptibility of Candida auris to broad-spectrum ultraviolet C light (UV-C).

BACKGROUND: Candida auris is an emerging and often multidrug-resistant fungal pathogen with an exceptional ability to persist on hospital surfaces. These surfaces can act as a potential source of transmission. Therefore, effective disinfection strategies are urgently needed. We investigated the efficacy of ultraviolet C light (UV-C) disinfection for C. auris isolates belonging to 4 different clades. METHODS: In vitro testing of C. auris isolates was conducted using 106 colony-forming units (CFU) spread on 20-mm diameter steel carriers and exposed to a broad-spectrum UV-C light source for 10, 20, and 30 minutes at a 1.5 m (5 feet) distance. Post-UV survivors on the coupons were subsequently plated. Colony counts and log reductions were recorded, calculated, and compared to untreated control carriers. Identification of all isolates were confirmed by MALDI-TOF and morphology was visualized by microscopy. RESULTS: We observed an increased susceptibility of C. auris to UV-C in 8 isolates belonging to clades I, II and IV with increasing UV exposure time. The range of log kill (0.8-1.19) was highest for these isolates at 30 minutes. But relatively no change in log kill (0.04-0.35) with increasing time in isolates belonging to clade III were noted. Interestingly, C. auris isolates susceptible to UV-C were mostly nonaggregating, but the isolates that were more resistant to UV exposure formed aggregates. CONCLUSIONS: Our study suggests variability in susceptibility to UV-C of C. auris isolates belonging to different clades. More studies are needed to assess whether a cumulative impact of prolonged UV-C exposure provides additional benefit.

Effectiveness of Copper-Impregnated Solid Surfaces on Lowering Microbial Bio-Burden Levels in an Acute Care Hospital.

BACKGROUND: Microbial bio-burden on high-touch surfaces in patient rooms may lead to acquisition of health care-associated infections in acute care hospitals. This study examined the effect of a novel copper-impregnated solid material (16%-20% copper oxide in a polymer-based resin) on bacterial contamination on high-touch surfaces in patient rooms in an acute care hospital. METHODS: Five high-touch surfaces were sampled for aerobic bacterial colonies (ABCs) 3 times per day over a 3-day period in 16 rooms with copper installed and 16 rooms with standard noncopper laminate installed on high-touch surfaces. A Bayesian multilevel negative binomial regression model was used to compare ABC plate counts from copper-impregnated surfaces with standard hospital laminate surfaces. RESULTS: The mean and median (interquartile range [IQR]) ABC counts from copper-impregnated surfaces were 25.5 and 11 (4-27), and for standard hospital laminate surfaces they were 60.5 and 29 (10-74.3). The negative binomial regression model-estimated incidence rate for ABC counts on plates taken from copper-impregnated surfaces was 0.40 (0.21-0.70) times the incidence rate of ABC counts on plates taken from standard hospital laminate surfaces. CONCLUSIONS: Copper-impregnated solid surfaces may reduce the level of microbial contamination on high-touch surfaces in patient rooms in the acute care environment, as our study demonstrated a decline in microbial bio-burden on samples taken from copper-impregnated compared with standard hospital laminate high-touch surfaces.

Draft Genome Sequence of an Unusually Multidrug-Resistant Strain of Achromobacter xylosoxidans from a Blood Isolate.

Achromobacter xylosoxidans strain DN2019 was isolated from blood of a septicemia patient. We describe the draft genome and antibiotic susceptibility of this strain.